Connect with us

ATA Trade Show

Turkey and Antler Displays from Mountain Mikes

Published

on

Mountain Mikes had a wide range of reproduction mounts and displays at the ATA Show in Indianapolis. The Skull Master can be used for deer and elk and allows each antler to be fixed to the reproduction skull. This also allows you to mount shed antlers.

The Skull Master is available in classic white along with dipped models in wood grain, fall camo and snow camo. For those that want to use their original skull plate (to qualify for P&Y or B&C) there is the Record Keeper. A similar design, except you use the original skull plate to attach to the reproduction skull and then putty to blend the two together.

The Rack Plaque is new for 2011 and features a Bone Collector leather cover for your antlers along with a Brotherhood plaque. This is a quick, simple and great looking way to display your antlers!

One of my personal favorite additions for 2011 is the Bear Collector. The Beard Collector also features a Bone Collector logo on the front and allows you to mount one turkey tail fan, one set of turkey legs and five beards!

Check out Mountain Mikes for more information on these products and where you can purchase them.
Continue Reading
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

ATA Trade Show

NAP Introduces the Killzone 2-blade Broadhead

Published

on

One of the newest additions to New Archery Products’ (NAP) family of broadheads is the Killzone. The Killzone is a rear-deploying 2-blade broadhead with a 2″ cutting diameter. New technology allows both blades to open and work together in unison for increased reliability. Another advantage of this design is that it allows the broadhead to gain maximum penetration while avoiding any single blade deployment or deflection upon impact or during penetration of the cavity.

With no o-rings or rubber bands to hold the blades in place bowhunters don’t have to worry about the blades prematurely opening. The rear-deployment design is also the least restrictive when it comes to penetration which means it doesn’t rob much of the arrow’s energy upon impact. Two blades also require less energy to push through an animal than 3 or 4 blade broadheads.
The blades on the Killzone feature NAP’s Diamized blade technology which NAP claims is one of the sharpest blades in the industry. Another thing that bowhunters in states like New York will appreciate is that the blades on the Killzone fold back, so it is not a barbed broadhead and is legal in most states including states like New York where barbed broadheads are illegal.
The Killzone is a 100 grain broadhead and available in three models: Cut-On-Contact tip, Trophy Tip or Deep Six. Sold in a 3-pack, the Killzone also includes a practice head that is designed to be easily removed from your target and will not tear it up as the real broadhead would.
The Killzone is set to retail for $39.99. A 3-pack of replaceable blades and tips will also be available. The blades are easily replaced and come with blades, replacement screws and wrench. Practice heads are also sold separately and will be in a 1 pack for $9.99.
Continue Reading

ATA Trade Show

Muzzy Introduces New DX-3 Broadhead

Published

on

I’m really excited about Easton’s new Injexion arrows with the smallest diameter of any hunting arrow on the market (just .236 compared to .294 for a standard diameter carbon arrow). The smaller diameter arrow shaft allows for increased penetration and decreased wind drift. The smaller diameter arrow, however, required Easton to develop the Deep Six insert.

Deep Six inserts, which use a non-conventional thread pattern (40 threads per inch instead of 32 threads per inch), provide 25% more thread engagement to keep points secure inside the insert. Additionally, the inserts are made from stainless-steel instead of aluminum for a 25% increase in strength. It also means your standard broadheads won’t work with the new Deep Six inserts and only specially designed broadheads will work. One such broadhead is the new Muzzy DX-3.
I had a chance to stop by the Muzzy booth at the ATA Trade Show and get my hands on a DX-3. Speaking with the guys in the booth I learned just how painstaking of a process developing the new DX-3 was – moving 1/10 of a grain from one end of the broadhead to another while still maintaining the 100g final weight was no easy feat.
The DX-3 is in essence a modified MX-3 with a slightly thicker ferrule and a tapered end to meet the shaft diameter for less friction and drag during flight. The same .025″ blades found on the MX-3 are used on the new DX-3 which also has a cutting diameter of 1-1/4″.

The Muzzy DX-3, coupled with the Easton Deep Six System, produces less wind drag than other larger broadhead-arrow combinations, resulting in increased accuracy and deeper penetration. When the same amount of energy is concentrated in the smaller Deep Six/DX-3 package, the result is devastating. The DX-3 also fits Easton’s Axis and Full Metal Jacket with Deep Six inserts. The Muzzy DX-3 has an MSRP of $29.95.

I’m really looking forward to shooting the new DX-3 and comparing the penetration against a MX-3 on a standard shaft. I have a feeling there will be a very noticeable difference in penetration. Now I just need get my hands on some Easton Injexion shafts!

Continue Reading

ATA Trade Show

2012 Bowtech Insanity CPX and CPXL released at the ATA Trade Show

Published

on

Following on tradition, Bowtech once again unveiled it’s new flagship bow at this years ATA Trade Show in Columbus, Ohio.

Advertisements with the phrase “Contain the Insane” were showing up everywhere and fueled anticipation for the unveiling of Bowtech’s latest creation. At 9:00 am on January 10th it happened – the Bowtech Insanity was unveiled to an enthusiastic crowd on the showroom floor at the ATA Trade Show.

The Insanity comes in two versions, a 32″ model shooting 355 feet per second and a 35″ model shooting 340 feet per second.

Featured on the Insanity bows is Center Pivot Extreme Technology, which resists shooter induced torque for greater forgiveness and accuracy. The OverDrive Binary Cam System to eliminate cam lean issues and provide exceptional tuning to produce cleaner arrow flight for greater accuracy.

HardCore limbs boost efficiency for more speed without a harsh draw. On typical limbs, most of the bow’s energy is stored near the outside of the limb, while the core stores minimal energy and serves as little more than a spacer.

HardCore Limbs put the core to work, storing energy not only near the surfaces, but also inside the limb. By sharing the workload, stress is reduced, producing exceptional durability. The carbon core is also significantly lighter than other limb materials available today, which produces a tighter physical response for increased energy efficiency, less noise, and less vibration.

The FLX-Guard greatly reduces cable guard torque to produce better arrow flight and easier tuning for greater accuracy. As the archer draws back, the cable guard flexes inward absorbing the cable guard torque that would normally be transferred to the riser. This also reduces lateral nock travel which increases the tuneability, forgiveness and accuracy of the bow.

The Carbon Rod String Stop is made of carbon, an extremely strong material with vibration-dampening properties. It is positioned directly in line with the stabilizer to effectively transfer vibration from the string to the stabilizer. This optimizes bow balance and dissipates noise and vibration efficiently.

Both bows come standard in Mossy Oak Treestand. Alternative finishes include Mossy Oak Infinity, GORE Optifade Forest or Open Country, Realtree APG HD and BlackOps. Target colors AnoRock Onyx and Inferno area also available. All finished except Mossy Oak Treestand include black limbs.

The insanity CPXL has a longer axle-to-axle length for added stability and forgiveness, which makes it the perfect fit for archers with a draw length up to 32″. The Insanity CPX will have a suggested retail price of $999 and the CPXL will retail for $1,049.

I had a chance to shoot the Bowtech Insanity side by side with last year’s Invasion at the Bowtech shooting lane. Shooting the Insanity was exciting as the bow really put some heat behind the arrows as it sent them down range.

One thing that stood out to me when drawing the bow was the short valley. Upon releasing the arrow I felt a lingering vibration throughout the bow. However, this was a bare bow so some vibration is to be expected and a hunting rig outfitted with a stabilizer and other accessories should significantly decrease if not completely eliminate any vibration.

Another notable mention was the overall balance of the Insanity. When shooting last year’s Invasion, the bow slightly kicked back after the shot. The new design of the Bowtech Insanity makes the bow extremely well balanced and the Insanity remained steady even after the shot.

Overall, I think Bowtech did a good job with the Insanity and there were noticeable improvements over the Invasion, specifically in the overall balance of the bow. The bow was fast, the grip was slim and the bow was easy to keep on target. The valley was short, however, and I did have one draw where I let up a little while at full draw and the bow pulled me forward.

If you have a chance, take a trip to your local Bowtech dealer and shoot the Insanity to see what it’s all about.

SPECIFICATIONS
CPX
Brace Height: 6″
Draw Weights: 50, 60, 70, 80
Draw Length: 25.5-30 inches
Axle to Axle: 32″
IBO/ATA Speed: 355 fps
Kinetic Energy: 98.0 ft.-lbs. at 70 lbs.
Effective Let-Off: approx 80%
MSRP: $999
CPXL
Brace Height: 7″
Draw Weights: 50, 60, 70, 80
Draw Length: 27.5-32 inches
Axle to Axle: 35″
IBO/ATA Speed: 340 fps
Kinetic Energy: 89.9 ft.-lbs. at 70 lbs.
Effective Let-Off: approx 80%
MSRP: $1,049
Continue Reading

Trending